The DSE8610 is an easy to use multi-generator loadshare system, designed to synchronise up to 32
generators including electronic and non-electronic engines.
The DSE8610 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.
NEW DEAD BUS SYNCHRONISING FEATURE (SOFTWARE UPGRADE AVAILABLE) AND SUPPORT FOR NEW EXPANSION MODULES:
DSE2131 – Ratiometric Input Expansion Module
Digital inputs, resistive inputs, 0-10V inputs and 4-20mA inputs. This gives greater flexibility when interfacing the DSE controller to external sensors (ie pressure, temperature, level)
DSE2133 - RTD/Thermocouple Input Expansion Module
Thermocouple (J and K type) and PT100 RTD (2, 3 and 4 wire types). This allows the connection of accurate temperature sensors such as those embedded into alternator windings.
DSE2152 - Analogue Output Expansion Module
Analogue outputs 0-10V, 4-20mA. This is useful for connection to external devices such as PLCs, building management systems and external gauges.
Read more
• Dead Bus Synchronising
• Multi event exercise timer
• Back-lit LCD 4-line text display
• Multiple display languages
• Automatic start/Manual start
• Audible alarm
• Fixed and flexible LED indicators
• Event log (250)
• Engine protection
• Fault condition notification to a designated PC
• Front panel mounting
• Protected front panel programming
• PC configuration
• Configurable alarms and timers
• Configurable start and stop timers
• SMS alert messaging
• Remote monitoring
• Compatible with DSE8700 Series
generators including electronic and non-electronic engines.
The DSE8610 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.
NEW DEAD BUS SYNCHRONISING FEATURE (SOFTWARE UPGRADE AVAILABLE) AND SUPPORT FOR NEW EXPANSION MODULES:
DSE2131 – Ratiometric Input Expansion Module
Digital inputs, resistive inputs, 0-10V inputs and 4-20mA inputs. This gives greater flexibility when interfacing the DSE controller to external sensors (ie pressure, temperature, level)
DSE2133 - RTD/Thermocouple Input Expansion Module
Thermocouple (J and K type) and PT100 RTD (2, 3 and 4 wire types). This allows the connection of accurate temperature sensors such as those embedded into alternator windings.
DSE2152 - Analogue Output Expansion Module
Analogue outputs 0-10V, 4-20mA. This is useful for connection to external devices such as PLCs, building management systems and external gauges.
Read more
Main features
KEY LOAD SHARE FEATURES:
• Peak lopping
• Sequential set start
• Manual voltage/frequency adjustment
• R.O.C.O.F. and vector shift
• Generator load demand
• Automatic hours run balancing
• Mains (Utility) de-coupling
• Mains (Utility) de-coupling test mode
• Dead bus sensing
• Bus failure detection
• Direct governor and AVR control
• Volts and frequency matching
• kW and kV Ar load sharing
KEY FEATURES
• Comprehensive loadshare capabilities
• Configurable inputs (11)
• Configurable outputs (8)
• Voltage measurement
• Power monitoring (kW ,kV A, kV Ar)’
• Built-in governor and AVR control
• kW overload alarms
• Comprehensive electrical protection
• Magnetic pick-up
• Electronic engine capability
• RS232 & RS485 remote communications
• Modbus RTU
• PLC Functionality
• Peak lopping
• Sequential set start
• Manual voltage/frequency adjustment
• R.O.C.O.F. and vector shift
• Generator load demand
• Automatic hours run balancing
• Mains (Utility) de-coupling
• Mains (Utility) de-coupling test mode
• Dead bus sensing
• Bus failure detection
• Direct governor and AVR control
• Volts and frequency matching
• kW and kV Ar load sharing
KEY FEATURES
• Comprehensive loadshare capabilities
• Configurable inputs (11)
• Configurable outputs (8)
• Voltage measurement
• Power monitoring (kW ,kV A, kV Ar)’
• Built-in governor and AVR control
• kW overload alarms
• Comprehensive electrical protection
• Magnetic pick-up
• Electronic engine capability
• RS232 & RS485 remote communications
• Modbus RTU
• PLC Functionality
• Dead Bus Synchronising
• Multi event exercise timer
• Back-lit LCD 4-line text display
• Multiple display languages
• Automatic start/Manual start
• Audible alarm
• Fixed and flexible LED indicators
• Event log (250)
• Engine protection
• Fault condition notification to a designated PC
• Front panel mounting
• Protected front panel programming
• PC configuration
• Configurable alarms and timers
• Configurable start and stop timers
• SMS alert messaging
• Remote monitoring
• Compatible with DSE8700 Series
KEY BENEFITS
• RS232 & RS485 can be used at the same time
• DSENet connection for system expansion
• PLC functionality
• Auto voltage sensing
• Five step dummy load support
• Five step load shedding support
• High number of inputs and outputs
• Worldwide language support
• Configuration Suite PC software
• Direct USB connection to PC
• Ethernet monitoring
• USB host
• Data logging & trending
• Synchronised and on load in 15 seconds
• RS232 & RS485 can be used at the same time
• DSENet connection for system expansion
• PLC functionality
• Auto voltage sensing
• Five step dummy load support
• Five step load shedding support
• High number of inputs and outputs
• Worldwide language support
• Configuration Suite PC software
• Direct USB connection to PC
• Ethernet monitoring
• USB host
• Data logging & trending
• Synchronised and on load in 15 seconds
0 Response to "DSE 8610 Auto Start Load Share Control Module"
Posting Komentar